This machine is suitable for making 1 or 2 tuen ring by round wire. NC wire feed system is adoptedon RM-S type machine. It's new generation.



The optional device is necessary for the spring that is on blue back.


Item RM-16 RM-30 RM-50 RM-80
Wire diameter to be used φ0.3～1.6mm φ0.8～3.0mm φ2.0～5.0mm φ3.0～8.0mm
Max.coilling outer diameter φ20mm φ50mm φ75mm φ100mm
Cutting power 0.3t 1t 3t 5t
Max.wire feed length 100mm 500mm 700mm 2000mm
Production speed 43～290pcs/min 30～120pcs/min 8～88pcs/min 3～61pcs/min
Main motor
 0.75kw 4p 2.2kw 4p 5.5kw 4p 7.5kw 4p
Machine dimension 630(W)×750(L)×1400（Ｈ） 1065(W)×1030(L)×1850（Ｈ） 1965(W)×1350(L)×1950（Ｈ） 2100(W)×1400(L)×2150（Ｈ）

※Production rate is in the case of 60Hz.

Item RM-30S RM-50S RM-80S
Wire diameter to be used φ0.8～3.0mm φ2.0～5.0mm φ3.0～8.0mm
Max.coilling outer diameter φ50mm φ75mm φ100mm
Cutting power 1t 3t 5t
Max.wire feed length 999mm 999mm 999mm
Wire feed motor 3.0kw 4.4kw 6.0kw
Cutting motor 2.2kw 4p 5.5kw 6p 7.5kw 4p
Machine dimension 1300(W)×1200(L)×1850（Ｈ） 1600(W)×1350(L)×2000（Ｈ） 1800(W)×1550(L)×2150（Ｈ）